The compressed air pipeline is designed to prevent corrosion

Air compressor energy saving piping system piping can be installed on the wall or ceiling, its series of accessories can be made, you can customize the compressed air system according to your specific production needs. No leakage: the energy-saving pipe fitting of air compressor adopts anti-corrosion design to ensure no leakage installation and eliminate energy waste. Maximum flexibility: the air compressor energy efficient piping can be readily fitted with a quick steering device to build an additional shunt, as it is connected laterally to eliminate the risk of condensed water pollution.

Compressed air line, air compressor use belt and shaft driving, more belt has the advantages of stable transmission, but usually takes root in parallel manner, the belt may be caused by the uneven uneven load, reduce the transmission efficiency, coupling use after a period of time, experience elastic deformation occurs, would also reduce the transmission efficiency. Yilang two-stage compression series adopts helical gear transmission with transmission efficiency up to 99%, which completely eliminates the problem of transmission efficiency reduction.

Air path system includes air filter, air inlet valve, pipeline, oil, cooler and so on. The flow resistance and pressure loss of gas path system should be reduced as far as possible on the basis of guaranteed performance. For example, air filter and oil core with smaller pressure loss should be selected, coolers and pipelines should be cleaned regularly, and intake valves with large diameter and low pressure loss should be selected.

Easy to identify and reduce pressure: all components of air compressor energy saving pipes are easy to adjust and can be reused, so energy saving pipes will help in the future, pipe network will be added. The pipe conforms to most industry standards and is painted blue or green in a standardized manner for easy identification of the pipe network. The large diameter orientation and internal fin orientation design eliminates airflow constraints and ensures many possible low pressure drops.

The pipeline system of dalian compressed air pipeline is: air pipeline, cooling water pipeline, oil and water blowing pipeline, load regulating pipeline and emission pipeline. The compressed air pipeline in workshop is divided into main pipe, main pipe and branch pipe. The compressed air pipeline in the workshop can be laid on the ground, in the ditches, in the ground or in the ground.