Briefly describe the cleaning problem of quick installation aluminum alloy pipeline

 When installing and cleaning public or industrial sewage gas supply system pipelines, it is necessary to pay attention to the amount and pressure of high-pressure water, and pay attention to the disposal of debris and sewage discharged from pipelines to avoid secondary pollution. Family of drainage pipe cleaning, attention should be paid to the use of cleaner make or shop are not too much, and use of cleaning tools cannot be too sharp, although can play the role of clean, but improper use may cause certain damage to pipeline, and even affect the service life of pipelines.

Quick installation of aluminum alloy pipeline gas supply system pipeline installation of hydrogen, oxygen, gas and various gas pipeline into the laboratory branch pipe should be applied. When there are hydrogen, oxygen and gas pipelines in the pipeline well and the technical layer of the pipeline, ventilation measures should be taken with the frequency of air exchange of 1-3 times per hour. For general purpose laboratories designed by standard unit groups, all gas pipelines shall also be designed according to standard unit combinations. The gas pipe passing through the wall or floor of the laboratory should be applied in the embedded sleeve pipe. The pipe in the sleeve pipe should not have weld. Non-combustion materials should be used to seal the pipe and casing.

The gas pressure is stable, and the system adopts two-stage decompression method to supply gas, which can obtain very stable pressure efficiency. Through the air supply control system, the gas in the cylinder can be fully used to reduce the residual gas margin and reduce the gas cost. Easy to operate, all cylinders in the same location, reduce the operation of handling and installation, save time and cost to reduce the rental of cylinders, the use of centralized gas supply, can reduce the number of cylinders requirements, thus saving the cost of cylinder rental; No gas cylinder in the laboratory, can improve the safety, improve the sense of security, save the laboratory operating space convenient inspection and maintenance.

Hot water unclogs the drain: rice residue and oily dirt in the kitchen often stick to the wall of the drain, blocking the pipes in the pool. To avoid clogging, or minor clogging, flush the drain frequently with boiling water, which will allow it to melt and flow. Pump dredge sewer: find a pump, remove the pump clamp, with waste cloth wrapped in the pipe, thickness can fill the sewer mouth, force into the sewer mouth. Then wet the waste cloth with water to prevent air leakage. After pumping, the sewer plug pressure increased, the tube plug movement, when heard the plug down the sound, the pipeline is unobstructed.