Do you know how the quick install aluminum alloy piping works

Why do you say that? Because for the pipeline loose sleeve expansion joint, there are flange connection, and direct welding connection, as long as the joint has a little bit of common sense people should be clear, the time to weld a expansion joint is definitely several times or even ten times the use of flange connection,

It is obvious that joining expansion joints by welding must be very time consuming. Secondly, as for the adjustment of the expansion amount of the expansion joint, it must be adjusted in advance before the installation of the expansion joint. If the expansion amount is adjusted during the welding process, it will have a great impact on the installation of the expansion joint. As for the sealing problem, whether there is a good sealing effect is very important for the expansion joint. Many installers have problems when the expansion joint is sealed

The utility model relates to a quick detachable connection structure of the installation side of dalian quick mounting aluminum alloy pipeline, including quick unloading bolt, nut, pin, movable platen, connecting rod, left pipe, right pipe; Where, the end of the left pipe and the right pipe has a ring convex structure. When the two pipes are connected, the convex structure edge on the contact side is perpendicular to the axis of the left pipe and the right pipe. The Angle between the other edge of the convex structure and the axis of the left pipe and the right pipe is greater than 90°.

The movable platen for aluminum alloy pipeline and one end for connecting platen are hinged with connecting rod by pin respectively. The other end of the clamping plate is connected by a pin and a quick-release bolt. The other end of the movable clamping plate is provided with a groove for clamping the quick-release bolt. The nut is connected with the quick-release bolt. The movable pressing plate and the connecting pressing plate are fastened to the ring convex structure surface at the end of the left pipe and the right pipe. Advantages of the utility model: easy to use, it can be used for detachable pipe connection under the condition of space limitation or pipe connection that requires rapid assembly and disassembly.

The inner surface is bright and clean, and the self-oxidation layer is corrosion-resistant. Compressed air pressure loss is small, energy saving, pipeline beautiful, simple, easy to install, fast plug. Installation cost is very low, easy to disassemble, move, modify, pipe and joints than galvanized pipe high can not be used as a water pipe, because the aluminum pipe rigid as galvanized pipe, but very flexible.