Quick installation of aluminum alloy piping for your interpretation of piping knowledge

Before installing the line loose set of expansion joint, must want to know, what are the factors that will affect the speed of expansion joint installed, such as, the expansion joint connections, scale adjustment, how to realize the sealing effect and other factors, are the important factors influencing the expansion joint can be installed quickly, among them, and key expansion joint connection way.

Rapid installation of aluminum alloy pipeline in the European and American countries have been widely used in the transport of compressed air, vacuum, nitrogen and inert gas. The product for its corrosion resistance, quick installation, low pressure drop, excellent properties obtained by recycling 100% including maotai, CSR, youngor, changyu, faw, dongfeng, Volkswagen, Beijing auto, wahaha, Coca-Cola, philips, baoji cigarette factories, xuchang cigarette factories, xuchang machine factory of many domestic famous enterprises such as recognition, aluminum alloy and quick piping system will gradually replace the traditional carbon steel and stainless steel class of traditional pipeline, cheaper for the use of units of the gas fluid conveying clean.

A device for conveying gases, liquids, or fluids with solid particles connected by pipes, pipe coupling (fittings), valves, etc. Usually, the fluid flows from the high-pressure part of the pipeline to the low-pressure part after being pressurized by blowers, compressors, pumps and boilers. It can also be transported by the pressure or gravity of the fluid itself. Pipelines are widely used in water supply, drainage, heat supply, gas supply, long-distance transportation of oil and natural gas, agricultural irrigation, hydraulic engineering and various industrial devices.

When the fluid flow rate is known, the diameter of the pipe depends on the allowable flow rate or the allowable friction resistance (pressure drop). When the flow rate is high, the pipe diameter is small, but the pressure drop value increases. Therefore, when the flow rate is high, the investment in pipeline infrastructure can be saved, but the operating energy consumption of power equipment such as pumps and compressors increases. In addition, if the velocity is too high, there may be some other adverse factors. Therefore, pipe diameter should be determined according to construction investment, operation cost and other technical factors.

When the flow rate of the fluid is known, the diameter of the pipe depends on the allowable flow rate or the allowable frictional resistance (pressure drop). When the flow rate is high, the pipe diameter is small, but the pressure drop value increases. Therefore, when the flow rate is high, the investment in pipeline infrastructure can be saved, but the operating energy consumption of power equipment such as pumps and compressors increases.